power entry modules with line filter grm2 www.schurter.com/pg0 6 emc products iec appliance inlet c14 with line switch, fuseholder 1- or 2-pole, voltage selector (series-parallel), "lock and shield" mounting, grm2: only with shield, without line filter c14 70 c description - panel mount: snap-in version from rear-side - 5 functions: appliance inlet protection class i, line switch 2-pole, with or without fuseholder for fuse-links 5 x 20 mm, with or without voltage selector, with emc-shield approvals - vde certificate number: 40024784 - ul file number: e93617 characteristics - ultra-compact design time saving lock and shield snap-in design for rear-panel mounting - all single elements are already wired - fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user - voltage selector for two voltage ranges innovative emc-shielding with flexible steel segments for an excellent contact to the panel - insulation cover on the rear-side - qualified for use in equipment according iec/en 60950 other versions on request - panel thickness 1.0 / 2 / 2.5 mm (max.) - fuseholder 1-pole - line switch 1-pole - voltage selector with other marking references weblinks pd f , general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , accessorie s newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 10 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 10 a @ ta 40 c / 125 vac; 60 hz dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) allowable operation temp. -25 c to 85 c climatic category 25/085/21 acc. to iec 60068-1 degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 4.8 x 0.8 mm solder terminal on request solder terminals for voltage selector panel thickness s snap-in: 1.5 mm (other on request) material: housing thermoplastic, black, ul 94v-0 appliance-inlet/-outlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 fuseholder 1 or 2 pole, shocksafe category pc2 acc. to iec 60127-6, for fuse-links 5 x 20 mm rated power acceptance @ ta 23 c 5 x 20: 2 w (1 pole)/ 1.6 w (2-pole) per pole power acceptance @ ta > 23c admissible power acceptance at hig - her ambient temperature see derating curves line switch rocker switch 2-pole, non-illuminated, acc. to iec 61058-1 technical detail s voltage selectors optional, jumper, 2 pos. mtbf > 1'400'000 h acc. to mil-hb-217 f
2 power entry modules with line filter grm2 www.schurter.com/pg0 6 emc products dimensions 48.3 mm grm2 33.9 49.5 24 5 31.7 6.5 8.4 38.4 45.4 1.7 12.5 2 42.3 r5 4.5 2.2 3.9 26.0 13.4 min.8 *) e 8.6 s 0.05 pe 6.9 34.2 4.5 r1 13.45 40.9 0.05 0.1 +0.1 0 pe l n 0.1 dimensions step 1 place the socket in top edge of the panel cut-out. step 2 push the socket upwards. step 3 push the socket forward into the panel cut-out. step 4 release the socket. the component is self adjusting. diagrams voltage selector grm2 1) line 2) load
power entry modules with line filter grm2 www.schurter.com/pg0 6 emc products derating curves 1-pole admissible power ac - ceptance in watt 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n 2.0 1.5 1.0 0.5 0.0 ambient air temperature ta c 2-pole admissible power ac - ceptance in watt per pole 0 2 0 4 0 6 0 8 0 100 0.2 0.0 i = < < i n i = 0.7 i n i = 1.0 i n 1.6 0.6 0.4 0.8 1.2 1.0 1.4 ambient air temperature ta c variants asic version - marking of the voltage selector /20 - with housing and cover on the rear-side rated current [a] filter-type fuseholder line switch voltage selectors order number 10 without - 2-pole grm2.1160.013 10 without - 2-pole l grm2.1161.023 10 without 2-pole 2-pole grm2.1180.013 10 without 2-pole 2-pole l grm2.1181.023 packaging unit 20 pcs mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types togrm 2 connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types togrm 2 ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types togrm 2 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|